CompTIA Network+ Acronyms Practice Questions: More Practice Questions
9 free, exam-style CompTIA Network+ Acronyms (N10-009) practice questions covering More Practice Questions. Each question shows the correct answer and a clear explanation. Ready for the real thing? Take the full timed quiz below.
Explanation: STP stands for Spanning Tree Protocol. It is a network protocol that builds a logical loop-free topology for Ethernet networks.
Q2. What does VTP stand for?
A.VLAN Trunking Protocol✓ Correct
B.Virtual Transport Protocol
C.Video Transfer Protocol
D.Voice Transmission Protocol
Explanation: VTP stands for VLAN Trunking Protocol. It is a proprietary Cisco protocol that propagates the definition of Virtual Local Area Networks (VLAN) on the whole local area network.
Q3. What does LACP stand for?
A.Link Aggregation Control Protocol✓ Correct
B.Local Address Control Plane
C.Layered Authentication Capture Protocol
D.Logical Application Carrier Path
Explanation: LACP dynamically bundles multiple physical links into a logical link aggregation group.
Q4. What does RSTP stand for?
A.Rapid Spanning Tree Protocol✓ Correct
B.Remote Secure Transfer Port
C.Routing Session Tracking Protocol
D.Reliable Switch Trunk Path
Explanation: RSTP speeds convergence compared with classic Spanning Tree Protocol.
Q5. What does CIDR stand for?
A.Classless Inter-Domain Routing✓ Correct
B.Classed Internal Direct Routing
C.Common Internet Domain Routing
D.Centralized Intra-Domain Routing
Explanation: CIDR stands for Classless Inter-Domain Routing. It is a method for allocating IP addresses and for IP routing that allows for more flexible assignment of IP addresses than the original system of IP address classes.
Q6. What does SLAAC stand for?
A.Stateless Address Autoconfiguration✓ Correct
B.Secure Link Aggregation Access Control
C.Service Level Address Assignment Cache
D.Static LAN Address Authorization Check
Explanation: SLAAC lets IPv6 hosts configure addresses using router advertisements without DHCPv6 state.
Q7. What does MTU stand for?
A.Maximum Transmission Unit✓ Correct
B.Minimum Transfer Unit
C.Mean Time Usage
D.Maximum Throughput Utilization
Explanation: MTU stands for Maximum Transmission Unit. It refers to the size of the largest protocol data unit (PDU) that can be communicated in a single network layer transaction.
Q8. What does CSU/DSU stand for?
A.Channel Service Unit/Data Service Unit✓ Correct
B.Central Switching Unit/Distributed Switching Unit
C.Cloud Service Utility/Data Security Utility
D.Cable Signal Unit/Digital Storage Unit
Explanation: A CSU/DSU terminates digital circuits and connects customer equipment to carrier WAN services.
Q9. What does MTR stand for in network troubleshooting?
A.My Traceroute✓ Correct
B.Managed Traffic Router
C.Media Transfer Rate
D.Multicast Tunnel Relay
Explanation: MTR combines ping and traceroute-like path statistics.